[Boatanchors] 160m Coil, OR

[Carl]

Why not wind it on a ceramic form Barrie? Those are pretty much 
giveaways and you dont have to worry about the B&W coil spacers falling 
apart.

Carl
KM1H



----- Original Message ----- 
From: "Barrie Smith" <barrie at centric.net>
To: "Boatanchors Mail List" <boatanchors at mailman.qth.net>
Sent: Thursday, April 23, 2009 9:53 PM
Subject: [Boatanchors] 160m Coil, OR


> If i can't find a "ready-made" 160 plug-in coil, does anyone have some 
> coil-stock that I could build what II need with?
>
> This for a push-pull input circuit, with a max of 15 watts.  So, 
> coil-stock wiith small diameter wire would work FB.
>
> Would need 45 to 50 uh X 2 in a 1.5 to 2.5 inch length.
>
>
> Diameter 1 to 3 inches.
>
> 73, Barrie, W7ALW
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html