[Boatanchors] Parasitic suppressors

[mac]

Four or five turns wrapped around a 100 ohm, 1 Watt resistor is a good  
place to start.  Wire size not critical, 16 - 26 awg, bare or enamel  
covered  OK.  For a detailed discussion on the subject and examples  
see any 50's /60's ARRL handbook.

Dennis D. W7QHO
Glendale, CA



On Dec 22, 2009, at 7:57 PM, John King wrote:

> I need to wind some parasitic suppressor coils around resistors for  
> a pair of 6146 tubes. I need to buy some tinned copper  bus wire and  
> need to know the recommended diameter wire or wire size for making  
> the parasitic suppressors for the 6146 tubes.
>
> Your recommendations will be greatly appreciated. Thanks and 73,  
> John, K5PGW
>
>
>
>
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html