[GreenKeys] Paper tape

gil smith [email protected]
Thu, 14 Feb 2002 11:54:19 -0700


Jack:

You are thinking of Western Numerical Control.  They have paper tape at:
http://www.westnc.com/paptape.html

Order# 0500: 11/16" wide, 1000' roll, 8" Dia. (2" core), .004" thick,
oiled, unprinted, buff color, $55.00 for ten rolls.

Order# 0100A: 1" wide, 1000' roll, 8" Dia. (2" core), .004" thick, oiled,
unprinted, buff color, $38.00 for seven rolls.


They also have paper rolls at:
http://www.westnc.com/teletype.html

Order# TT101: Paper roll, ground wood buff color, 1 ply, friction feed,
8.44" wide by 4.5" dia. (core: 1.25" OD, 1" ID), $8.00 ea.


They have other stuff as well, like fan-fold 1" tape, mylar tape, M43
ribbon cartridges, white rolls of paper, 2-ply rolls of paper...


Unfortunately they have no 7/8" paper tape for KL machines, nor 5/16" or
3/8" stuff for tape printers.

I also wish they had 8.5" sprocket-feed paper to fit my M33.  Too bad the
sprockets cannot move to accept the generic 9.5" stuff.  I got one roll of
it on ebay once.  It is available in big fan-fold boxes as a special order
from office places, but the rolls are nicer.  Anyone have any extra?

gil


At 11:58 AM 2/14/02 -0500, you wrote:
>Why doesn't someone contact the place that
>is on the RTTY.COM list...Don, is is
>Western Controls or something like that? Ask
>them how much tape is on the rolls they sell.
>
>Jack WA2HWJ
>
>
>
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]]On Behalf Of Baum, Mitch
>Sent: Thursday, February 14, 2002 10:51 AM
>To: '[email protected]'
>Subject: RE: [GreenKeys] Length of tape
>
>
>With all due respect, tty rolls were in two basic
>sizes dependant on the weight of the paper,
>yellow was 100 foot rolls and newsprint type (thinner)
>was 150 foot rolls. TTY tape was orderable in rolls
>for each type machine 1" tape for 8 level was
>typically in 8" diameter rolls and 7/8" 5 level tape was in
>smaller 6" rolls.
>
>By the way - does anyone have a source for these items?
>
>
>Mitchel K. Baum
>N2UKJ
>
>
>
>
>-----Original Message-----
>From: Roy Morgan [mailto:[email protected]]
>Sent: Thursday, February 14, 2002 10:32 AM
>To: [email protected]; [email protected]
>Subject: Re: [GreenKeys] Length of tape
>
>
>At 08:25 PM 2/12/02 -0600, Don Mehl wrote:
>>Thanks John,
>>How long is a standard roll of tape
>... unwinding one to measure it is a waste and besides that I am lazy.
>
>Lazy Don,
>
>1) Measure the thickness of ten layers of tape with a micrometer.  Divide
>by 10 to get the thickness.
>
>2) Measure the diameters of the first and last turn of tape on the roll,
>add them and divide by two to get the diameter of the average
>turn.  Multiply by 3.14 to get the length of the average turn.
>
>3) Subtract the diameter of the inner turn from the diameter of the outer
>turn and divide by two to get the thickness of the layers.
>
>4) Divide this last number by the thickness to get the number of turns.
>
>5) Multiply the number of turns by the length of the average turn to get
>the total length.
>
>6) Divide by the length of tape used in one minute to get the total minutes.
>
>7) Report your results to the list.
>
>Roy
>
>- Roy Morgan, K1LKY since 1959 - Keep 'em Glowing!
>7130 Panorama Drive, Derwood MD 20855
>Home: 301-330-8828 Work: Voice: 301-975-3254,  Fax: 301-948-6213
>[email protected] --
>
>_______________________________________________
>GreenKeys mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/greenkeys
>_______________________________________________
>GreenKeys mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/greenkeys
>
>
>_______________________________________________
>GreenKeys mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/greenkeys
>
>

;-----------------------------------------------------------
;  vaux electronics, inc.             480-354-5556   
;  http://www.vauxelectronics.com     (fax: 480-354-5558)
;-----------------------------------------------------------