[GreenKeys] TTY-Connect shipment

[gil smith]

Hi folks:

TTY-Connect boards/micros shipped today.  They went priority mail, so you 
should see them in 2-3 days (except Ted;  International will be 1-2 
weeks).  If you don't get them within a reasonable time, let me know.  If 
anything is damaged, let me know.    If you have any questions, let me 
know.  If you know any good jokes, let me know.

I programmed the micros with the bootloader, but did not load the 
firmware.  You will need to load the firmware from a PC after your unit is 
built (it just takes a few minutes).  You will need a serial cable (DB9-F 
to DB9-M, straight-wiring) from the PC to TTY-Connect -- I will detail this 
all shortly.

Files/pictures/docs are at:
http://www.vauxelectronics.com/gil/tty-connect/

Firmware doc is still not up-to-date, so don't bother to print it out yet.

thanks,

gil



;  vaux electronics, inc.             480-354-5556
;  www.vauxelectronics.com (fax: 480-354-5558)
;-------------------------------------------------------------------------