[GreenKeys] $9.99 AN/UGC-129

[Jack]

Tom,

On the back of the UGC-129 you'll find connector J102.

If you jumper pins 2 and 11, your loop goes to pin 1 and
12 (pin 1 is "+", pin 12 is "-"). This works for a HV 60 ma. loop, putting
the
keyboard and printer in series.

You'll have to figure out how to hook up the AC. I
usually remove the filter and wire internally.

I used large paperclips for the "pins". Just cut off a one-inch
length, solder on your wires (cover with heatshrink, if you like)
and you are in business.

73,
Jack WA2HWJ

NNNN