[GreenKeys] Range setting on Model 28 and Model 35 Machines

[Eugene Hertz]

Hmmm. good point. I will check it out more tomorrow. The 90 that I arrived at was just a random number that seemed to give good print with the lpr on. I will however try to find the real center of the "good" range to see what the most optimal number really is. If you are right and if there is still something else wrong, I wonder again, if it could be that I have some selector magnets out of phase?

Eugene


>-----Original Message-----
>From: Don Robert House [mailto:drhouse at nadcomm.com]
>Sent: Friday, August 25, 2006 09:38 PM
>To: 'Teletype Friends'
>Subject: [GreenKeys] Range setting on Model 28 and Model 35 Machines
>
>The range knob is calibrated from 0 (Zero) to 120 (Zero) 
> 
>The optimum setting, if the signal is correct, should fall between 50 
>and 70. 
> 
>Settings outside of these margins indicate something else is wrong. 
>Possibly the polar relay, or the loop current in one of the two loops. 
> 
>Don 
>_______________________________________________ 
>GreenKeys mailing list 
>GreenKeys at mailman.qth.net 
>http://mailman.qth.net/mailman/listinfo/greenkeys 
>