[GreenKeys] On Freq or Off Freq???

[Eugene Hertz]

Larry and Jack, et. al.,
I am roughly between you guys geographically. I would LOVE to get in on this fun. Just waiting to get an antenna up and get some other stuff set up! I will be running 28KSR (or ASR) and FSK (if I can figure out how to key my CE 100v using the FSK jack). And now that I have my general... !!!
Chomping at the bit,
Eugene

>-----Original Message-----
>From: John Becker [mailto:w0jab at big-river.net]
>Sent: Wednesday, March 8, 2006 10:27 AM
>To: greenkeys at mailman.qth.net
>Subject: Re: [GreenKeys] On Freq or Off Freq???
>
>If you are using AFSK then you want a dial readout 
>of 3,682,125.... 
> 
>That will put your mark tone right on 3,680. 
> 
>The frequency you call out should be the one your 
>mark tone falls onto. Otherwise say dial freq. 
> 
>Hope this helps. 
> 
>John, W0JAB 
> 
> 
>At 09:03 AM 3/8/06, you wrote: 
>>OK, got the RTTY going last nite. Had a sked with Jack on 3.680. Now, 
>>what's the "correct" procedure for this: Do you put Mark on 3.680 or 
>>your carrier? I used LSB and injected the 2125 for Mark. 
>> 
>>Jack was looking for me on a different freq. How do most folks do 
>>this? I need to get my procedure correct. 
>> 
>>Many thanks to all, 
>> 
>>Larry 
>>K2JIA 
>>www.antiquetelephone.com 
> 
>_______________________________________________ 
>GreenKeys mailing list 
>GreenKeys at mailman.qth.net 
>http://mailman.qth.net/mailman/listinfo/greenkeys 
>