[GreenKeys] 30M RTTY Station - DDK9 - 10100.8 kHz

[wa3frp at aol.com]

Hi Larry,
 
You will be able to print DDK9  at 10100.8 kHz if you select 50 baud, 450 Hz shift AND disable unshift on space (if you have it enabled) and also go to reverse (mark is LOWER than space).
 
Folks on this list without access to 50 baud gears can also print this station with a temporary misadjustment of your page printer range finder. Simply move from the nominal setting, usually around 60, down to around 30.  This will allow your page printer to copy 50 baud. 
 
This is a fun station to print especially if your local radio and TV stations have dropped coverage of Baltic and Mediterranean WX. 
 
73 Russ WA3FRP - ACTIVE everyday on HF using my M28ASR / ST-6 / Collins TX and RX.