[GreenKeys] screws for keyboard

[Steve Ripper]

Larry:

I replaced my screws during a recent restoration with 2-56 stainless. They
worked just fine. Not sure if you will find these at Lowes or Home Depot. I
use a local screw & fastener company. I use stainless on just about
everything I restore to avoid any future corrosion issues, but anything will
work. They can also be found on ebay, but usually in quantities of 100.

Cheers,
 
Steve Ripper
steveripper at comcast.net
Mobile: 248-787-0705

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of LARRY D GODEK
Sent: Thursday, January 20, 2011 9:37 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] screws for keyboard


On my KSR keyboard, each side of the keys i have plastic covers where ckt id
and other data was displayed on pieces of paper.  Don't know how else to
describe it.  Anyway there are two screws, one at the top and one at the
bottom of the clear plastic covers.  In my case the screws are missing and
i'd really like to find some so these things stop sliding off the keyboard
and onto the floor.  Not where they are supposed to be.  Anyone happen to
ahve some laying around or know what they really are so i can maybe get some
someplace?
 
Larry
W0OGH
 		 	   		  
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html