[GreenKeys] Hal ST6 info

[Lee Mushel]

Well, the family reunion is at our house this year (Oct. 1st) and there is 
no way that I can touch anything ham radio until the XYL says I have 
completed all of the necessary preliminary chores---and that ain't gonna 
ever happen so all I can say is that if you haven't gotten all the answers 
you need by Oct. 2nd, you can email me a question and I'll do some research. 
In the attached photo you will see two ST-6s.   The bottom one with a few 
more front panel controls, is my own version but using the HAL boards and 
toroids from Elliott Buchanan (the only source of toroids in those days). 
I had all the machines attached to the back panel and one at a time they 
could be selected from the front.   I don't remember all of the other mods I 
added but there were several.   I suppose I have the original QSTs around 
here someplace.  This thread brings back a lot of pleasant memories from the 
time we had a weekly RTTY net in Milwaukee.

73

Lee  K9WRU
----- Original Message ----- 
From: "DR HOUSE" <Packard42 at gmail.com>
To: "Steve Ripper" <steveripper at comcast.net>; "Ray Rivers" 
<triv at charter.net>; "Richard Schumann" <richardschumann at comcast.net>
Cc: <Greenkeys at mailman.qth.net>
Sent: Thursday, September 22, 2011 10:17 PM
Subject: Re: [GreenKeys] Hal ST6 info


> Guys,
>
> Some of those coils are heavy.  I hope no damage was done.
> I have mentioned on this list several times over the years that the
> cards
> need to be numbered and wrapped separately when the unit is shipped.
> Sigh.... I am going down to my shack with camera in hand.
> Not sure if it will show but a mouse chewed up the wiring making my ST-6
> out of service.
>
> Don K9TTY
>
>
> On 22 Sep 2011, at 11:11 PM, Steve Ripper wrote:
>
> Dr. House:
> Send those photos my way too if you would be so kind. I also purchased
> and
> ST-6 and like Ray all of the PCB's were floating around inside.
> Cheers,
> Steve Ripper
>
> -----Original Message-----
> From: greenkeys-bounces at mailman.qth.net
> [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of DR HOUSE
> Sent: Thursday, September 22, 2011 11:51 PM
> To: triv at charter.net
> Cc: Greenkeys at mailman.qth.net
> Subject: Re: [GreenKeys] Hal ST6 info
>
> Ray,
>
> I will take some images of the inside of my ST-6 and send them to you
> so you can see where the cards go.
>
> Don K9TTY
>
>
> On 22 Sep 2011, at 10:28 PM, triv at charter.net wrote:
>
> Anyone have any information on the Hal ST6 terminal unit. I got the one
> off Epay and it arrived with all the circuit boards rattling around in
> it. I have a manual ordered from hal communications$$$, but don't know
> how long it will take to get here.
> Thanks
> Ray  AB0ZN
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>