[GreenKeys] Hal ST6 info

[tony j. podrasky]

Hi Bill;

I'd like to THANK YOU for such a fine product!

I've enjoyed my ST-6 for over 40 years.

Vy 73,
W6ESE - tony
NNNN
ZCZC

Bill Henry wrote:
> Thanks for the defense, Wayne.  The ST-6 was originally a kit that each ham
> built on his own.  With strong prodding, we built a "few" at the factory -
> turned out to be quite a few.  As you say, the cabinet and board mounting was
> never intended for "mobile" operation.  Factory built units were shipped with
> each circuit board wrapped in bubble-wrap and with an instruction sheet
> describing where to plug-in each board.  We also included thick foam padding
> on the top and bottom covers that compressed the boards when the covers were
> in place.  We have repaired units that were damaged due to improper shipping.
> It takes some time - at $75 per hour.  The best "insurance" is to be sure
> that the seller removes all circuit boards and protectively wraps them.  The
> ST-6 manual includes a diagram that shows where each board is installed - and
> the orientation.  A photocopy of the manual is still available for $20.00.
> 
> George W. (Bill) Henry President HAL Communications Corp. TEL:  217-367-7373 
> FAX: 217-367-1701
> 

-- 
Tony J. Podrasky | Imbesi's Law:
                  |   In order for something to become clean,
                  |   something else must become dirty;
                  |   But - you can get everything dirty
                  |   without getting anything clean.