[GreenKeys] Odd Lorenz motor behavior

[COURYHOUSE at aol.com]

great to have a mystery  solved! 
 
and Future Thanks  too... and I am  sure this  info will  help one of  us 
in the  future  should we  run into the  same  problem!
 
Ed#
 
 
In a message dated 6/25/2013 1:08:59 P.M. US Mountain Standard Time,  
jdangus at att.net writes:

Thank  you to Henning for pointing out it was a 1 uF capacitor
that was the  problem.

By the way, these are available stateside from  Galco.
<http://www.galco.com/buy/EBM-Papst/2100-4-7320>

Interestingly,  the threaded stud on the new part is metric and
the original nut from the  Lorenz fit's perfectly. I did have to
shorten the stud about 3/32" to not  protrude under the plate
it mounts to.

I should have the Lorenz back  together by the weekend. I want
to dribble and smear some oil and grease on  the various bits
while I have it apart.

I'll let you know how it  turned  out.

Jeff-1.0
wa6fwi

______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130626/ed608adf/attachment.html>