[GreenKeys] Odd Lorenz motor behavior

[COURYHOUSE at aol.com]

Good  Going!
 
  ok   you have the   little  tuning   fork   for the speed?
 
ed#
 
In a message dated 6/27/2013 9:01:55 P.M. US Mountain Standard Time,  
jdangus at att.net writes:

On  6/24/2013 10:43 PM, Jeffrey D Angus wrote:
> Thank you to Henning for  pointing out it was a 1 uF capacitor
> that was the problem.
The new  capacitor solved the speed problem.

Then I realized the rubber bushings  that support the plywood tray
underneath the machine had  failed.

Surprisingly  enough THOSE were available from McMaster  Carr.
With Metric threads. Those showed up today, and I had to do  a
little modifying to the wood cabinet and base because the new
bushings  don't have a long enough thread to reach the original
hardware.

A  7/8" spade bit to recess the hole in the plate an bit deeper
took care of  that end, then an 82 degree 3/4" counter sink took
care of slightly  recessing the flat head threaded inserts in the
cabinet.
 



It's back together now, waiting for me to se the speed on  the
motor  correctly.

Jeff-1.0
wa6fwi

______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130628/e24d2fae/attachment.html>