[GreenKeys] Model 33 Rubber Hammer

[COURYHOUSE at aol.com]

yea  I  would assume  someone    here    should have a handle  on making 
them!  We are a  pretty diverse  group. Ed#
 
 
In a message dated 9/30/2013 11:35:35 A.M. US Mountain Standard Time,  
lists at loomcom.com writes:

* On  Mon, Sep 30, 2013 at 06:55:35PM +0100, Jarratt RMA  
<robert.jarratt at ntlworld.com> wrote:
> Sounds like there is a plan  to see if more rubber hammer heads can be 
made.
> If enough people  contribute we could share the cost of having the mould
> made, I'd be  prepared to contribute if the cost is not too outrageous.

I'd be happy  to contribute, as well.

I don't have much experience with  manufacturing, but I assume set-up
costs will be expensive. Individual unit  cost after that should be
pretty low.

If someone with manufacturing  contacts can look at costs for the group,
maybe we'd have a better idea  what kind of money we'd need to come  up
with.

-Seth
______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130930/995a41fb/attachment.html>