[GreenKeys] Olivetti T2-CN ...

[Per Jensen]

> Hi Doriano and list.
> 
> I have my machine working beautifully after a lot of hard work :D
> 
> The documentation that i have available is this:https://www.dropbox.com/sh/zfbdrh9yj7cuwbc/AACHyDoPkuMhXVgnCIrt-M5Da?dl=0
> 
> I have taken some pictures along the way, and done some modifications to some parts that didn't seem right (wires routed incorrect by previous tech(?))
> 
> The pictures i took along the way, and some videos is available here:
> https://www.dropbox.com/sh/2pq7tdzcm51cvyd/AADwCoZhZPlfMkPf9k_qR1ISa?dl=0
> The filename-order/date on the pictures should show the progress correctly.
> 
> I have not found a way to build a solid-state governor right yet, but hopefully i'll come up with a solution one day that doesn't require a microcontroller (it just seems wrong to put a micro in the machine)
> 
> The latest video i took of the machine is this:https://www.dropbox.com/s/8vnm8m9a23dxtv3/Teletype%20running.mov?dl=0 - it shows it working with a bit of code i found here: 
> http://hackaday.io/project/2836-arduino-teletype
> 
> As the program is meant for a machine using the USTTY-code, whereas the machine is using the ITA2-code, there's a bell where there should be an apostrophé. I haven't had the time to look into the code and figure out how to change it (i'm a hardware guy, not software-geek)
> 
> Regards,
> 
> // Per.


> 
>> Hello Per
>> 
>> I have an Olivetti T2 CN and would be interested to restore in order to work (if I will have spare time and skill available).
>> I do not have precedent experimentation in the altering governor speed, but I have access to service manual and have a catalog of its parts.
>> If You are interested, I would be happy to share documentation and to know Your restoring advancement with me and other interested in this list.
>> 
>> With my best regards.
>> 
>> Doriano   IW1PAG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20141215/79d68eda/attachment.html>