[GreenKeys] [coldwarcomms] RE: Air Defense Command, Alert No, 1 Network (Teletype) - 1960

[Norm]

Thank you Jack for solving a question I have had about 7/8" tape, now that I know Kleinschmidt machines uses 7/8" tape, does anyone else know of any other machines that uses 7/8' tape?  I have a box of eight rolls 7/8" tape for anyone that can use them.

Thanks
Norm 
WB7WEQ

----- Original Message ----- 
From: Jack Hart 
To: 'Duncan Brown' ; greenkeys at mailman.qth.net 
Sent: Monday, February 17, 2014 6:27 AM
Subject: Re: [GreenKeys] FW: [coldwarcomms] RE: Air Defense Command, Alert No,1 Network (Teletype) - 1960


KL tape is 7/8 inch wide allowing the print to be read on the edge, while the 5 level

data is on the balance of the tape. The tape shown on the picture has the

5 level code bits in the middle. There are 28 type readers that

allow for 1 inch, 7/8 or 11/16 inch tapes by moving the tape guides.

They have the full 8 bit reading capability.

Same as used with the Dataspeed units.

 

Jack K0TTY

 

 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140217/c956fa4a/attachment.html>