[GreenKeys] M28LPR Print hammer...

[Don Robert House K9TTY]

Ken,

Could you please try to take some photos of the part and approximate dimensions.
I have a friend who is a mechanical engineer with lots of experience.  He also works with 3D printers.

Thanks,
Don
K9TTY



On 02 Apr 2015, at 12:40 PM, Kenneth Gartland wrote:

> Hi all...
>  
> A few weeks ago, I posted of the repro possibility
> for these almost impossible to find print hammers...
>  
> As said previously, I have one here that is in pristine condition, still very pliable...It mite make a perfect
> model for a repro run...
>  
> I can send it to anyone who mite be willing to investigate
> further...I have no use for it, as I don't. have any M28 equip.
>  
> Hope it can be done, as there are so many LPR's out
> there pbly in dire need for a replacement print head...
>  
> Cheers!
>  
> Ken VE3-HMQ 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html