[GreenKeys] M15 How to disable unshift-on-space?

[drlegendre .]

Here's a pic of the connection 'box' down inside the M15 table. Sorry for
the horrid image, hard to get a decent shot, esp with a phone..

https://nerp.net/~legendre/greenkeys/M15_table_connection_box.jpg

"STD POL" / "REV POL" on the front.

On Fri, Sep 18, 2015 at 10:09 PM, Jim Haynes <jhhaynes at earthlink.net> wrote:

> All the ones I've seen use the screw-type household fuse, except it's
> an odd value like 6 1/4 amp slow-blow.  Remember that the motor draws
> much more starting current than running current.  Also some installations
> include a 120VDC power supply, and there is often a convenience outlet
> on the side of the base where the repair guy can plug in a soldering
> iron or a light fixture.  Not that I'd want to be soldering on the wiring
> while it is plugged into the power line.
>
> The bare machine doesn't care about polarity.  Those which include a
> polar relay on the base do.  And there are some variables like a motor
> control relay that is controlled by polarity.
>
> Can you send a picture of the Bell System box you are talking about?
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150919/ddd5014b/attachment.html>