[GreenKeys] What are these shims for ?

[Jack]

The shims are used to adjust the spacing gear’s mesh to the mainshaft gear.

Those are unused “spares”.

 

I also notice there’s a twisted/bent tab on the inside of the right front spacing

wheel. You might want to watch that when you get the machine running.

It might be the right-margin stop or the stop for auto CR/LF. Hard to see.

 

Jack K2TTY

 

 

 

 

 

From: GreenKeys [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Pete Lancashire
Sent: Sunday, April 16, 2017 1:34 PM
To: greenkeys <GreenKeys at mailman.qth.net>
Subject: [GreenKeys] What are these shims for ?

 

On the printer from the 28RO there are these bent up shims

https://goo.gl/photos/sj5NLfDjQ5bfTJZh6

what are they for ?

-pete

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170416/77da86d8/attachment.html>