[GreenKeys] model 28 cleaning

[Jim Plummer]

Ken -  These machine can take much abuse.  I have washed them with 409 or Gunk then rinsed with water.  Place it in a hot box or low temp oven to dry it out.  Then apply the lube.  This is all to be accomplished without the selector magnets or platen attached.  It is easier if the front plate assembly is removed as well.   
de Jim - K8ARY

      From: Ken Stritzel <stritzel at svs.com>
 To: greenkeys at mailman.qth.net 
 Sent: Tuesday, February 7, 2017 4:28 AM
 Subject: [GreenKeys] model 28 cleaning
   
i have a model 28 that i would like to put in use and when i opened
the lid, i saw that the printer is full of sawdust from my son's
woodworking.  what is the best way to clean the print mech?
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k8ary at yahoo.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170207/512bd1d0/attachment.html>