[GreenKeys] Stop the asr33 motor

[Wayne Durkee]

Julien,

If the cover is off the machine, you can remove the motor fuse.

It sounds like you have a motor control in your 33 that only works in Line mode. That is normal with motor control installed most times.

The first character that the 33 receives in Line mode should start the motor again.

Regards,

Wayne
KB1FDW


> On January 9, 2017 at 1:54 PM Julien Scrofani <julien.scrofani at gmail.com> wrote:
> 
>     Hi guys,
> 
>     Is there a way to stop the tty motor after it launched, other than unplug it ?
>     I noticed that, in line mode, it stops by itself after 2 minutes if there is no data traffic. It seems it's not the case in local mode.
> 
>     Regards,
>     Julien
>     ______________________________________________________________
>     GreenKeys mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:GreenKeys at mailman.qth.net
> 
>     2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>     1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>     Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>     Message delivered to teletypeparts at comcast.net
> 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170110/910a3fe0/attachment.html>