[GreenKeys] HAL ST-6 Manual

[keelan at beefchicken.com]

Thanks, everyone that replied! I think I have what I need. I'll respond 
individually when I have time this evening!

- Keelan
VE7NCR

On 2017-01-23 21:00, keelan at beefchicken.com wrote:
> I'm trying to hunt down a manual for a HAL ST-6. I have a good
> in-depth article on the Mainline ST-6, but I haven't been able to
> track anything down the for HAL's version.
> 
> My unit appears to be working (alternating mark/space lamps flashing
> when I feed it a valid signal), until I connect it to a teletype, in
> this case a 28KSR. After that, it sits on mark with no activity on the
> printer. I may have the 170/850 boards mixed up -- the 170 Hz shift
> limiter might be plugged into the 850 Hz shift Discriminator (or
> vice-versa). What order should these boards me in?
> 
> FWIW, In tuning mode on 850 shift, I get peaks on the meter at 2125
> and somewhere around 3KHz (?) (pure sine wave tuning input). On 170
> shift, I only get a peak at 2125 Hz.
> 
> Thanks,
> 
> Keelan
> 
> VE7NCR
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: 
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to keelan at beefchicken.com