[GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA

Sat Nov 10 09:10:31 EST 2018

One of the photos clearly shows that the printer is a sprocket feed printer. Something to consider 
if the machine is to be used for demonstrations, etc. The paper is available, but more expensive 
and not always 'a few mouse clicks away.' 

A few weeks back, someone posted a URL or a company name where the paper can be found. 
Nothing has been 'fed back' to the G/K group about price. Ordinary white or 'canary' paper is 
easily available on rolls that most machines can use. 

Although it is annoying at times, multi-copy with carbon paper is also out there. I've 're-spooled' 
this stuff a few times and although it works, it is a messy job. There is probably a machine out 
there somewhere that will do this but other than machines used for this job with the large 
'GreenBar' paper used in computer printers, I've never seen one. 

If you are lucky, you can sometimes get the carbon waste off of your hands in a few days. And, 
the job can be done with gloves on, as well. 

Good luck to whomever gets this machine. 

Ralph - W8ROI 

- - - - - - - - 

----- Original Message -----

From: "Steve Garrison" <steve.n4tty at gmail.com> 
To: "Paul Birkel" <pbirkel at gmail.com>, "Greenkeys" <greenkeys at mailman.qth.net> 
Sent: Friday, November 9, 2018 6:05:52 PM 
Subject: Re: [GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA 

I think what you are referring to is a circuit board that was in that area and is not part of the M19. I had the board removed and discarded as it was obviously not part of the machine. 

Steve G./N4TTY 

From: Paul Birkel <pbirkel at gmail.com> 
Sent: Friday, November 9, 2018 1:42 PM 
To: 'Steve Garrison' <steve.n4tty at gmail.com>; 'Greenkeys' <greenkeys at mailman.qth.net> 
Subject: RE: [GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA 

The partially cantilevered shelf on the left, over the M14-TD, if you look at the photos from the rear it seems to be more than a shelf. There appears to be attached inside on the right some sort of panel that looks like a series of protuberances on a darker material. Seen in photos #2, #10, and #12 (out of 14 photos in all). 

Also, can you tell me the width and depth of the table? Or better, what document(s) I should be studying to understand this setup, and those dimensions? I’ve located M14 and M15 documentation, but so far documents for this complete setup have eluded me … 

Thanks. 

From: Steve Garrison [ mailto:steve.n4tty at gmail.com ] 
Sent: Friday, November 09, 2018 10:28 AM 
To: 'Paul Birkel'; 'Greenkeys' 
Subject: RE: [GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA 

Not sure what you are referring to by “ attached to the lower-outer-inside.” And the “extra” characters on the five keys were a puzzle to me also. 

Steve G./N4TTY 

From: Paul Birkel < pbirkel at gmail.com > 
Sent: Friday, November 9, 2018 8:56 AM 
To: 'Steve Garrison' < steve.n4tty at gmail.com >; 'Greenkeys' < greenkeys at mailman.qth.net > 
Subject: RE: [GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA 

Oh … my, indeed! What is that attached to the lower-outer-inside of the stand? It looks like a series of protuberances on a darker material. 

Also, what is with what appear to be black-on-white quadrants in the FGHZV keys? 

From: greenkeys-bounces at mailman.qth.net [ mailto:greenkeys-bounces at mailman.qth.net ] On Behalf Of Steve Garrison 
Sent: Friday, November 09, 2018 8:30 AM 
To: Greenkeys 
Subject: [GreenKeys] M19 with Reperf on Shelf in Kennesaw, GA 

This is the M19 that Nick, N0NCQ, and I went to take a look at the other day. Pics are much better than the one on the Craig’s list post and give a better indication of condition. While this $$$ figure is WAY over what I offered, the guy we saw almost came down to what I had offered before we decided to walk away. If anyone on list wants more info, maybe contact me off list so we don’t clutter everyone else’s inbox. 

https://www.ebay.com/itm/Western-Union-Telegraph-Co-Operating-Table-7904-2-A-SEE-NOTES/323223096071 

Steve G./N4TTY 

______________________________________________________________ 
GreenKeys mailing list 
Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:GreenKeys at mailman.qth.net 

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html 
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20181110/5d10a5c8/attachment.html>