[GreenKeys] 14KTR Punch Adjustment Question

[John Lawson]

Greetings Greenkeyers!


Here is an arcane question:

Model 14 KTR: How far above the punch bottom die block should the punch 
pins protrude?

The one I'm working on got a bunch of loose chads wedged in the slot for 
the paper tape, and now that I have it apart and cleared - and seeing 
how the punch pin height is adjusted - I'd like to dial them in to see 
if they are acceptable.

The machine worked well for many hours, punching ITTY, and then it 
stopped punching the sprocket hole.

D'OH!


Thanks in advance for any assistance - if I had the proper manual I'd 
have looked this up, but nothing I have or can find has this measurement.


Cheers

John KB6SCO

Carson City



-------------- next part --------------
A non-text attachment was scrubbed...
Name: 14KTR Punch lower dieblock.jpg
Type: image/jpeg
Size: 414838 bytes
Desc: 14KTR Punch lower dieblock.jpg
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20191230/6d93289d/attachment-0001.jpg>