[GreenKeys] Extra Character on CR/LF

[Nick]

Hi Steve

I am at least 100 years away from being an expert on 28's but could it be that the selected mechanic's for  " I "  and  " 8 " are slightly engaged - in other words slightly stuck? I know, it does not make any sense, right?

I would print several lines with  " I "  and  " 8 "  and see what happens. Maybe something is slightly engaged and will free after the exercise.

What the heck do I know  -:(

Nick  -  N0NCQ



Sent from my T-Mobile 4G LTE Device


-------- Original message --------
From: Steve Garrison <steve.n4tty at gmail.com>
Date: 1/21/19 7:13 PM (GMT-05:00)
To: Greenkeys <greenkeys at mailman.qth.net>
Subject: [GreenKeys] Extra Character on CR/LF

Hopefully this attachment will come through.

I’m getting a extra character just before the carriage of my M28 gets back to the left margin.  It seems it is always an “I” if the machine in in LTRS shift and an “8” if in figs shift.  And also only when returning from longer lines.

In the attached photo you can see the “8” in the word “COUNT” and the “I” in the words “HENRI” and “FRENCH.”

I’m sure someone out there has seen this and knows what the problem might be..

Steve G./N4TTY

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190122/6fa67855/attachment.html>