[GreenKeys] Model 15 Typebar replacement

[Paul Heller]

Well done. I find the manuals very confusing.

Paul
W2TTY

ITTY:			HTTP://INTERNET-TTY.NET:8000/ITTY
AUTOSTART: HTTP://INTERNET-TTY.NET:8030/AUTOSTART
EUROPE:		HTTP://INTERNET-TTY.NET:8040/EUROPE

> On Feb 4, 2020, at 4:58 PM, Ken Kinderman <scr274 at gmail.com> wrote:
> 
> Got the answer... should have looked more closely into TM11-352 (page 146).
> 
> Sure enough, you need to remove the typebar guide from the ribbon oscillator. That allows the typebar to lean back enough to disengage from the pull bar. Then the typebar just slides out. 
> 
> Then, the manual says, 
> 
> “Replace the new typebar in the type segment, and engage the the pull bar so that the pull bar is even with the other pull bars when the typebar is in the rest position.” A bit of black magic needed there, but once you know the trick it’s easy.
> 
> No need to loosen the curved rod. 
> 
> Thanks all. 
> 
> Ken Kinderman
> W2EWL 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to paul0926 at comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200204/3f7239ed/attachment.html>