[GreenKeys] 28 typing reperf hammer adjustment?

[John, W9DDD]

Does this have anything to do with the axial corrector plate?

John, W9DDD

On 11/11/2020 1:53 PM, Nick England wrote:
> I needed a change of perspective. Thanks to Tom Tillson, I now know that 
> there are shims that can go behind the typewheel to adjust it in/out. So 
> since the hammer head won’t go to the type character, the character can 
> go to the hammer head.
> 
> Cheers
> Nick
> 
> 
> On Wed, Nov 11, 2020 at 12:22 PM Nick England <navy.radio at gmail.com 
> <mailto:navy.radio at gmail.com>> wrote:
> 
>     Is there an adjustment for the Model 28 typing reperf hammer that
>     moves it in/out to determine where it hits the character on the
>     typewheel? There is an eccentric adjustment for side-to-side but the
>     only thing I have found for in/out is to loosen the two mounting
>     screws and wiggle it a bit. Am I missing something?
> 
>     Thanks,
>     Nick England K4NYW
>     www.navy-radio.com <http://www.navy-radio.com>
> 
> -- 
> Nick England K4NYW
> www.navy-radio.com <http://www.navy-radio.com>
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>