[GreenKeys] Teletype Model 32 ASR Chad Box

[John]

Greetings Greenkeys!

Until a wise, kind, generous Listmember provided me with a Real Chadbox 
- I did the following to keep the little yellow bits from propagating 
all over the house...

A standoff (1/4", threaded for #10-32) extends down from the pan into 
the orange bin, and attaches to it's bottom surface - to empty it just 
remove the lower screw.

My ASR33 is next to a desk so the chadbox is hidden, but it doesn't look 
all that bad....  IMHO.


Cheerz

John KB6SCO
Carson City

On 9/18/2020 3:36 AM, Paul Birkel wrote:
>
> https://www.ebay.com/itm/254721983741
>
> Ouch ($35 starting bid; BIN $75).
>
> Someone was considering 3D-printing one of these in two parts and then 
> solvent-welding them together?  Any progress?
>
> I’ve done “terrible things” with stiff cardboard and glue in the 
> past.  Something serviceable (with a cutout window covered with a 
> sheet of acetate) might be ginned up in that manner given careful 
> dimensioning.  Use “Teletype Gray” cardboard and then stencil a logo 
> on the side :->.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200918/d517be16/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ASR33 ChadBoxHack2.jpg
Type: image/jpeg
Size: 336187 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200918/d517be16/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ASR33 ChadBoxHack3.jpg
Type: image/jpeg
Size: 312487 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200918/d517be16/attachment-0003.jpg>