[GreenKeys] Model 15 Keyboard Communication Problem

[John, W9DDD]

Also the break position should make the printer run open.

---
----
The above comments or recommendations are SWAG. Use at your own risk.
John, W9DDD

On 3/26/2021 10:17 AM, Jon N5MHI wrote:
> On 24 Mar 2021 at 22:30, AA6RK via GreenKeys wrote:
> 
>  > The shaft on the keyboard
>  > reacts properly when the typing keys are struck, BUT the printer
>  > doesn't print with the key strokes.?
> 
> On my Model 15's there is a Send/Rec/Break lever on the left side of the 
> keyboard that, if not in the Send position, will bypass the keyboard 
> contacts.
> As a last resort, you can disconnect the wiring on the keyboard and 
> connect a new cable directly to it and put it in series with the loop.
> -Jon N5MHI
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>