[GreenKeys] Wiring model 15 keyboard and printer in series

[ad7i]

Chris --

In case it may be helpful to you, I've attached a PDF of a wiring
pictorial I made of my Model 15.

>From the pictorial, for my M15, I'd connect one side of the loop
supply to 45 and the other to 32.  However, as with all Teletype
wiring, your mileage may vary.

Paul, ad7i


On Tue, Nov 23, 2021 at 11:51 AM chris johnson
<archangel_cpj at hotmail.com> wrote:
>
> What terminals do I wire together with a jumper or jumpers to put the keyboard into series with the printer so it prints as I type???.? I believe I have the DC loop wired correctly as per the wiring diagrams Ive seen but want to ensure I have the keyboard in series before I apply DC power... Ive already tested the AC side it seems to be working well motor runs and keyboard encodes when keys are pushed...
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> >>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
> >>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> >>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> >>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ad7i at ad7i.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: M15-Wiring-201004-03.pdf
Type: application/pdf
Size: 133107 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20211123/fd1579ad/attachment.pdf>