[GreenKeys] Baud rate change

[steve bennett]

 Adding to what Paul said...You will not overheat a 50hz motor by feeding it 60Hz BUTbecause the change in frequency will cause the inductive reactance of the motor to increasemotor may get less current and be sluggish.An increase in voltage would compensate but could exceed the rating of your motor windings.-Steve
    On Wednesday, September 1, 2021, 10:47:05 AM EDT, Joe Duszyński <joeduszynski1 at gmail.com> wrote:  
 
 The motor has an odd governor on it with an external box which also supplies the loop current the unit does not plug directly into wall voltage the wiring goes from the unit into that external box then it(the box) plugs into 220v 50hz needless to say its not running at 50 baud its running slightly faster because of the 60hz. 

If I messed around with the governor and an oscilloscope I "COULD" probably get it to run at 50 baud but the motor and that power box won't live a happy life being fed 220v 60hz vs its native 220v 50hz eventually it will overheat and BBQ.

I'd rather run it either on DC or 110VAC 60hz

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to raleigh_ranger at yahoo.com  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210901/9b379589/attachment.html>