[GreenKeys] Model 43 replacement ribbon ?

[Mike Enkelis]

Here are the files and some information on how I made the cartridge re-ink roller.
The re-ink roller does not have to be 100% perfect.
Let me know where I can send you some empty shells if you need it.
I can also make some ribbon loops, or you can follow the notes on Thingiverse for making the ribbon and re-ink roller.
I am NOT charging anything, just trying to help others with keeping the model 43 running.

________________________________
From: Chuck Rehor <chuck at rehor.com>
Sent: Wednesday, September 29, 2021 2:25:34 PM
To: Mike Enkelis <menkelis at yahoo.com>
Cc: greenkeys at mailman.qth.net <greenkeys at mailman.qth.net>; ian parr <parrid at hotmail.com>
Subject: Re: [GreenKeys] Model 43 replacement ribbon ?

Hello all you GreenKeyers,

This is my first post since discovering this fantastic group a few weeks ago (thanks to mr_rtty for telling me about this group)!!!

I too need ribbons for my two Teletype Model 43’s that I’m trying to get working for myself and my small telecom museum that I am the curator of here at Nokia (formerly Lucent Technologies/Alcatel-Lucent/AT&T/Bell Labs/Western Electric/Teletype).

I’ve just about exhausted every possible avenue of getting ribbons. I have one machine just about working but can’t see what it is trying to print. The ribbon has holes due to the previous owner, and I shattered the petrified reinking wheel just by touching it and trying to measure it.

I contacted many suppliers of dot-matrix cartridges hoping to find someone that has a 1/4” (6mm) x 39” (1000mm) ribbon so I can replace it but haven’t had any luck.

Michael Enkelis, I sure would like to buy a few of those cartridges that you printed so that I have a spare for each. I thought about learning how to create a 3D copy but that was farther down on my list... finding a replacement ribbon and reinking wheel is first.

So does anyone have a source of replacement ribbon and reinking wheel, or even a whole new cartridge???

THANKS for such a great network of experts on this forum keeping Teletypes alive!!!

Chuck Rehor

On Wed, Sep 29, 2021 at 10:55 AM Mike Enkelis via GreenKeys <greenkeys at mailman.qth.net<mailto:greenkeys at mailman.qth.net>> wrote:
I have created a 3D printer ribbon cartridge for the model 43 and have extra that you can have.

Michael Enkelis
________________________________
From: greenkeys-bounces at mailman.qth.net<mailto:greenkeys-bounces at mailman.qth.net> <greenkeys-bounces at mailman.qth.net<mailto:greenkeys-bounces at mailman.qth.net>> on behalf of ian parr <parrid at hotmail.com<mailto:parrid at hotmail.com>>
Sent: Wednesday, September 29, 2021 7:56:37 AM
To: greenkeys at mailman.qth.net<mailto:greenkeys at mailman.qth.net> <greenkeys at mailman.qth.net<mailto:greenkeys at mailman.qth.net>>
Subject: [GreenKeys] Model 43 replacement ribbon ?

Hello folks,

Would anyone have a source for a replacement ribbon for the model Teletype model 43 please ?

Thanks in advance
______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net<mailto:GreenKeys at mailman.qth.net>

>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to chuck at rehor.com<mailto:chuck at rehor.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20210929/3abbe3b3/attachment.html>