[GreenKeys] 255A Polar Relay Wiring

[til128 at juno.com]

A quick and easy way to connect to the relay if you don't have a socket is to use Molex .062 female connectors on the pins. Just push them on. See attached. Tom

Please note: message attached

From: Tom Hunter <tomhenryhunter at gmail.com>
To: GreenKeys at mailman.qth.net
Subject: [GreenKeys] 255A Polar Relay Wiring
Date: Mon, 16 Jan 2023 11:59:11 -0500

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230116/98405c97/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0006.jpg
Type: image/jpeg
Size: 454149 bytes
Desc: IMG_0006.jpg
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230116/98405c97/attachment-0002.jpg>
-------------- next part --------------
A while back someone asked me  how I wired a polar relay to my military
Dovetron. I finally put it together.
I used coax with a BNC on the Dovetron +/- 12V end and wired the relay end
to a solder terminal strip. I used stranded hookup wire to connect to the
relay. Since I did not have a socket and did not want to solder to the
plug, I pulled wrap-around pins from an old octal tube socket, squeezed
them tighter with pliers and pushed them on the

[image: My 255A Relay.jpg]
The shield of the coax is connected to pin 2 of the relay, the center
conductor to to pin 6. Pins 3 and 8 are jumpered
to put the two windings in series aiding. The marking contact is taken from
pins 1 and 4, In my system this goes to a  plug to patch it in to any loop
with a loop supply. The relay is mounted on an aluminum plate to fit  a 4
inch square electrical box since the relay is mounted sideways, I made sure
the contacts were horizontal so they would not be biased by gravity. It
worked the first time.

I am attaching a drawing of the 255A from the New RTTY Handbook, page 71
and a photo of the installed relay patched into one of my loops.


Tom   N3CRK
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230116/98405c97/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: My 255A Relay.jpg
Type: image/jpeg
Size: 102753 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20230116/98405c97/attachment-0003.jpg>