[GreenKeys] LPR35 BRP code bars?

[Jim Cooper]

I see the springs on the punch pins jiggling, and they 
seem to switch back and forth for the R Y ... 

I also saw the type wheel turning back and forth, 
which suggests that characters ARE being set up. 

why on earth don't you just put some paper tape in 
the punch chute and SEE what the punches are doing? 

Also, don't forget that on most TTY machings you can 
turn off the motor and rotate it by hand while keying in 
mark and space in the loop, and see in slow motion how 
things are setting up. 

w2jc 


On 27 Jan 2023 at 20:25, W2HX wrote:

> More progress continues to be made! Thanks to John W9DDD and Nick
> K4NYW I have solved the electrical/motor issue and things
> progressing.
> 
> I have now connected the reperf into my loop and sent a tape through
> to test if the selector magnets and code bars(?) are functioning. It
> seems part of the character setup mechanism is working, but that set
> up doesn´t seem to be making it to the punches. Here is a short
> video of what is happening.
> https://youtu.be/Wyu9cAyw55o
> 
> any suggestions where to look are very much appreciated. This thing
> is reaaaallly complex!
> 
> Thanks all!
> 
> 
> 73 Eugene W2HX
> Subscribe to my Youtube Channel:
> https://www.youtube.com/@w2hx/videos