[GreenKeys] Model 28ASR ribbon re-inker

[John, W9DDD]

A closer measurement shows the KSR/RO has about 1/4" more room than the 
ASR cabinet.


On 2/23/2025 3:32 PM, John, W9DDD wrote:
> I checked the ASR vs KSR cabinet clearances and they are pretty close 
> to the same as far as distance between the ribbon mechanism and the 
> cabinet side.  So I would say it would fit on an RO or KSR for 
> standard cabinets.  The skin tight or rack mount versions I can't 
> check, but doubt they have room. The compact version (UGC-20/25) has 
> no room.
>
>
> On 2/22/2025 3:51 PM, Ken LoCasale wrote:
>> Gang,
>>
>> Here is my version of a ribbon re-inker fitted on my 28ASR.
>>
>> https://qrpbuilder.com/m28asr-ribbon-re-ink-attachment
>>
>> 73,
>>
>> ken - wa4mnt
>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net
>>
>>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: 
>>>>> https://teletype.net/gksearch
>>>>> 2002-to-present greenkeys archive: 
>>>>> http://mailman.qth.net/pipermail/greenkeys/
>>>>> 1998-to-2001 greenkeys archive: 
>>>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: 
>>>>> http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w9ddd at tapr.org
>

-- 
---
----
The above comments or recommendations are SWAG. Use at your own risk.

John, W9DDD