[GreenKeys] Model 15 Governor motor Specs RQ

[John Spigel]

There may also be a 1MF capacitor seried with a 5 ohm resistor at the 
left rear of the 15 deck and under where the polar relay would mount 
that you should disconnect completely to see if the GFCI still trips. I 
found that there was high leakage to its 3" rectangular metal shell that 
caused my unit to trip. I replaced the cap with newer device.

You could also remove the motor assembly from the deck and power 
independently to see if you can isolate to the motor assembly.

73. John W1AN


On 20-Jan-25 15:23, bambi.page wrote:
> The motor on the Model 15 I am restoring trips the Ground Fault
> breaker even after replacing the filter capacitors, so I am looking
> sadly to replace it. Would a member know where the specs for this 1/25
> HP motor including torque could be found? Thank you -byes- bambi
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w1an.dxusa at gmail.com