[GreenKeys] Printer won't align model 15

[John Spigel]

On 21-Sep-25 18:13, Windows XD wrote:
> Dear all,
> 
> My printer won't seem to align itself to the datastream it is being sent 
> no matter how I adjust the speed adjuster on the side, what do you 
> recommend I do to trouble shoot it? It prints perfectly fine when it is 
> printing to itself. I currently have it hooked to an Arduino which is 
> sending out RYRYRY in Baudot. To eliminate the question of is it the 
> code, it is currently has a 22 second start delay, 22 second delay per 
> bit, and a 31 second ending delay. That is currently being run through a 
> solid state relay capable of switching at that speed. I know it can do 
> this since it works with the keyboard when moving locally. Furthermore, 
> the letters it prints are always the same depending on the speed 
> setting, (although wrong) so it's not like there's a mechanical issue.
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w1an.dxusa at gmail.com