[GreenKeys] Model 28 Wall Mount (Finally) mounted in truck

[david at stickelman.net]

The frame for it has 6 rubber shock mounts to absorb movement.  I have
used velcro strips to hold down parts that move around.  Ill get a better
outer strap, but the lime green strap is ok for the moment.

I have been printing with it and it has been going great in its new home,
but today it wouldn't start.  I reset the breaker on the motor and while
the typing unit was off I could see the motor bounce back and forth, then
slowly start.  It occasionally starts in reverse.  I will not start at all
with the load of the typing unit on it, the breaker trips after a couple
seconds.

Reading BULLETIN 295B and I suspect the starting capacitor perhaps?  I
dont see any obvious damage or burned parts on the existing starting
capacitor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3155.jpeg
Type: image/jpeg
Size: 1128523 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20260321/bf3d0636/attachment-0001.jpeg>