[ICOM] Icom 502-A

[John Geiger]

I had this same problem with a Icom 505 a few years ago.  AOR scanners have
the same plug.  I bought the power cord from them, but it was wired slightly
differently than the Icom, so I did an internal modification to get the Icom
to work right with it.

73s John NE0P

----- Original Message -----
From: "Bruce Crow" <ki4hhk at verizon.net>
To: <icom at mailman.qth.net>
Sent: Thursday, May 04, 2006 10:59 AM
Subject: [ICOM] Icom 502-A


> I have acquired a really nice, clean, working Icom IC-502A.
> It has all the good things for operating .... except the DC power cord.
> This is the one with the strange three pin female molded plug on the end,
> which kind of looks like a
> triangle with the corners shaved off.  I have been told that Icom only
used
> these on the Icom "book shelf series".
> Does anyone either know where or have a spare cord or else does anyone
know
> of a source for the cord
> and/or connector?
>
> Thanks in advance for any help or leads.Bruce Crow
> (KI4HHK at verizon.net
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>