[ICOM] (no subject)

[John Luthy]

Paul,

That is your problem!!  CT is tone squelch,  If the radio does not "
"hear" the correct tone" You will hear nothing!!   Change it to only
show T and I suspect that all will be back to normal.

BTW  I have two  TH-22AT 's and I often find them difficult to
program, configure.  Thank God for the cloning feature, it has saved
my bacon more than once.

John
N7JL
----- Original Message ----- 
From: "Paul Gates, KD3JF" <pearly732003 at yahoo.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Monday, May 15, 2006 12:19 PM
Subject: Re: [ICOM] (no subject)


> I have it on CT but still no sound. I do have a manual.
>
> Paul, KD3JF
> Glen Burnie, MD
> FM19qd (Map Grid Square)
>
>
>
> ----- Original Message ---- 
> From: John Luthy
> To: ICOM Reflector
> Sent: Monday, May 15, 2006 3:00:07 PM
> Subject: Re: [ICOM] (no subject)
>
>
> Puul ,
>
> Look at the display, do you see T or CT If is says CT you have
> activated tone squelch, I can send you a manual if you need it,
>
> John
> N7JL
> ----- Original Message ----- 
> From: "Paul Gates, KD3JF"
> To: "Icom Icom"
> Sent: Monday, May 15, 2006 11:56 AM
> Subject: [ICOM] (no subject)
>
>
> > I will admit this is a foolish question... But wondering if anyone
> on this reflector might have a Kenwood TH22AT HT? I was checking my
PL
> freq and somehow screwed things up so now I do not have receive! I
> have adjusted the squelch threshold level to 5 on a scale from 0-9,
> but still no receive. Anyone got any ideas?
> >
> > Paul, KD3JF
> > Glen Burnie, MD
> > FM19qd (Map Grid Square)
> > ---- 
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
>
> ---- 
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/