[ICOM] IC-756

[Pete ....]

Hi Adam and all who replied,

You are absolutely right. The level adjustment is in
the software and I do not need the Tiger Electronics
Signal Link Plus Module.

Thanks to everyone, the radio works fine now and there
are lessons learned for myself.

A special thanks to the reflector!

73,
Peter / NH6VB 

--- Adam Farson <farson at shaw.ca> wrote:

> Hi Dave, 
> 
> Correct. The nominal level at the MIC socket is 10
> mV rms. The nominal level
> at ACC(1) Pin 4 is 100 mV rms.
>  
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of David J. Ring, Jr.
> Sent: 15 May 2006 19:26
> To: ICOM Reflector
> Subject: Re: [ICOM] IC-756
> 
> You need a lot more audio input at the ACC socket
> than at the microphone
> socket.
> 
> 
> 
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com