[Boatanchors] Needed for SP-600

[Dave Reynolds]

What you are calling slightly bulging head rack and panel screws are 
normally called"Phillips Pan Head Screws".
Just my 2 cents worth to the thread.

                                    73  Dave K6WRF
----- Original Message ----- 
From: <WA5CAB at cs.com>
To: <boatanchors at mailman.qth.net>
Sent: Saturday, April 25, 2009 7:41 PM
Subject: Re: [Boatanchors] Needed for SP-600


> Our local neighborhood Ace Hdw does as well.  They commonly come in sizes
> from at least #6 to #14 (1/4").  You can use standard flat-head screws 
> with
> them but the slightly bulging head rack and panel screws look much better.
> I'm not certain whether Ace carries those or not as I've only ever needed 
> to
> buy the washers.
>
> In a message dated 4/25/2009 9:03:45 PM Central Daylight Time,
> w5jo at brightok.net writes:
>> Also know as "finish washers"
>>
>>
>> ----- Original Message ----- 
>>
>> >Our local Ace Hardware carries those.
>> >
>> >73, Barrie, W7ALW
>> >----- Original Message ----- 
>> >From: "Bob Young" <youngbob53 at msn.com>
>>
>> >
>> >
>> >I have an SP-600 with original case but the 4 metal grommets(?) on
>> >each side
>> >that the screws go into through the faceplate to hold the radio in
>> >the case
>> >are missing, anyone have any ideas or have any for sale? Also need
>> >the cover
>> >lock if anyone has one for sale.
>>
>
> Robert & Susan Downs - Houston
> wa5cab dot com (Web Store)
> MVPA 9480
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html