[GreenKeys] Re: help on hookup

[John Gibbs]

Hi Clarence, Gil....

If your using MMtty  you can get a baudot output on a comport by going 
into the Options and select TNC emulation select baudot modem then the 
comport you want to have the incoming signal to be directed to. A null 
modem cable is also required if your using a baudot  terminal with a 
rs232 input.  Otherwise a small interface is needed to take the data on 
pins 2 & 3 of the port to and from your modem.  This way you get the 
MMtty regeneration of the incoming rtty signals.

73 John / VE7BDQ