[GreenKeys] USB-teletype adapter with ASR33 question

[teletypeparts at comcast.net]

A 33 from the factory usually needs 20MA on the receive side. The send side can be whatever satisfies your RS232 adapter. 

The 33 with UCC-6 does not supply any external loop current either transmitting or receiving as they normally come from the factory. 

Only local loop current is supplied. 

What Julien has in his electronic unit is a mystery to me as I have never seen the electronics in it before. 

Wayne 



----- Original Message -----

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160607/86de9c8a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Local Loop PS.JPG
Type: image/jpeg
Size: 919659 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160607/86de9c8a/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20 MA wiring 1.jpg
Type: image/jpeg
Size: 119551 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160607/86de9c8a/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20 MA wiring 2.jpg
Type: image/jpeg
Size: 138480 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160607/86de9c8a/attachment-0003.jpg>